WSC 1991:
Phoenix,
Arizona,
USA
Proceedings of the 23th Winter Simulation Conference, Phoenix, Arizona, USA, December 8-11, 1991.
ACM Press 1991 BibTeX
- Arne Thesen, Laurel E. Travis:
Introduction to simulation.
5-14
Electronic Edition (ACM DL) BibTeX
- Jerry Banks:
Selecting simulation software.
15-20
Electronic Edition (ACM DL) BibTeX
- Averill M. Law, Michael G. McComas:
Secrets of successful simulation studies.
21-27
Electronic Edition (ACM DL) BibTeX
- Andrew F. Seila:
Output analysis for simulation.
28-36
Electronic Edition (ACM DL) BibTeX
- Robert G. Sargent:
Simulation model verification and validation.
37-47
Electronic Edition (ACM DL) BibTeX
- Randall P. Sadowski:
Avoiding the problems and pitfalls in simulation.
48-55
Electronic Edition (ACM DL) BibTeX
- Springer W. Cox:
GPSS World: a brief preview.
59-61
Electronic Edition (ACM DL) BibTeX
- Edward C. Russell:
SIMSCRIPT II.5 and MODSIM II: a brief introduction.
62-66
Electronic Edition (ACM DL) BibTeX
- Thomas J. Schriber:
Perspectives on simulation using GPSS.
67-71
Electronic Edition (ACM DL) BibTeX
- William J. Garrison:
NETWORK II.5, LANNET II.5 and COMNET II.5.
72-76
Electronic Edition (ACM DL) BibTeX
- John Goble:
Introduction to SIMFACTORY II.5.
77-80
Electronic Edition (ACM DL) BibTeX
- Daniel T. Brunner, Robert C. Crain:
GPSS/H in the 1990s.
81-85
Electronic Edition (ACM DL) BibTeX
- Peter L. Haigh:
Simulation of computer systems and networks with MOGUL and REGAL.
86-89
Electronic Edition (ACM DL) BibTeX
- Daniel T. Brunner, Nancy J. Earle, James O. Henriksen:
Proof animation: the general purpose animator.
90-94
Electronic Edition (ACM DL) BibTeX
- Lee W. Schruben:
SIGMA tutorial.
95-100
Electronic Edition (ACM DL) BibTeX
- Charles R. Harrell, Ken Tumay:
ProModel tutorial.
101-105
Electronic Edition (ACM DL) BibTeX
- Cynthia J. Kasales, David T. Sturrock:
Introduction to SIMAN IV.
106-111
Electronic Edition (ACM DL) BibTeX
- Jean J. O'Reilly:
SLAM II tutorial.
112-117
Electronic Edition (ACM DL) BibTeX
- William R. Lilegdon:
Introduction to SLAMSYSTEM.
118-121
Electronic Edition (ACM DL) BibTeX
- David R. Kalasky, Deborah A. Davis:
Computer animation with CINEMA.
122-127
Electronic Edition (ACM DL) BibTeX
- David Krahl:
Tutorial: scheduling manufacturing systems with FACTOR.
128-131
Electronic Edition (ACM DL) BibTeX
- Hamdy A. Taha:
Simulation with SIMNET II.
132-135
Electronic Edition (ACM DL) BibTeX
- Stephen G. Vincent, Averill M. Law:
UniFit II: total support for simulation input modeling.
136-142
Electronic Edition (ACM DL) BibTeX
- Joseph M. Fegan, Gearóid M. Lane, Paul J. Nolan:
Introduction to simulation using Intelligent Simulation Interface (ISI).
143-147
Electronic Edition (ACM DL) BibTeX
- Onur M. Ülgen, Norm Otto, Timothy Thomasma:
Reusable models: making your models more user-friendly.
148-151
Electronic Edition (ACM DL) BibTeX
- Stanislaw Raczynski:
PASION tutorial.
152-156
Electronic Edition (ACM DL) BibTeX
- John S. Ramberg, Susan M. Sanchez, Paul J. Sanchez, Ludwig J. Hollick:
Designing simulation experiments: Taguchi methods and response surface metamodels.
167-176
Electronic Edition (ACM DL) BibTeX
- David Goldsman, Barry L. Nelson, Bruce W. Schmeiser:
Methods for selecting the best system.
177-186
Electronic Edition (ACM DL) BibTeX
- John M. Charnes:
Multivariate simulation output analysis.
187-193
Electronic Edition (ACM DL) BibTeX
- Diane P. Bischak, Stephen D. Roberts:
Object-oriented simulation.
194-203
Electronic Edition (ACM DL) BibTeX
- Süleyman Sevinc:
Extending common LISP object system for discrete event modeling and simulation.
204-206
Electronic Edition (ACM DL) BibTeX
- Pierre L'Ecuyer:
An overview of derivative estimation.
207-217
Electronic Edition (ACM DL) BibTeX
- Jeff Rothenberg:
Tutorial: artificial intelligence and simulation.
218-222
Electronic Edition (ACM DL) BibTeX
- Marc Abrams, Ernest H. Page, Richard E. Nance:
Linking simulation model specification and parallel execution through UNITY.
223-232
Electronic Edition (ACM DL) BibTeX
- Marc Abrams, Ernest H. Page, Richard E. Nance:
Simulation program development by stepwise refinement in UNITY.
233-242
Electronic Edition (ACM DL) BibTeX
- Rajive Bagrodia:
Iterative design of efficient simulations using Maisie.
243-247
Electronic Edition (ACM DL) BibTeX
- S. Manivannan, Jerry Banks:
Real-time control of a manufacturing cell using knowledge-based simulation.
251-260
Electronic Edition (ACM DL) BibTeX
- Sheldon X. C. Lou, Houmin Yan, Suresh P. Sethi, Anne Gardel, Prabhat Deosthali:
Using simulation to test the robustness of various existing production control policies.
261-269
Electronic Edition (ACM DL) BibTeX
- Pierre A. Lefrançois, Pierre L'Espérance, Marc Turmel:
Batching annealing operations to optimize queueing times and furnance efficiency: a simulation model.
270-279
Electronic Edition (ACM DL) BibTeX
- Toshiharu Aoki, Shusuke Nakayama, Mariko Yamamoto, Mariko Hashimoto, Jun-ichiro Tanaka:
Combinatorial scheduler: simulation & optimization algorithm.
280-288
Electronic Edition (ACM DL) BibTeX
- Zen-ichirou Muro, Norihiko Yanagihara, Hideo Fujimoto:
Super simulation shell for plants.
289-293
Electronic Edition (ACM DL) BibTeX
- Susumu Morito, Tomohiro Takano, Hisanobu Mizukawa, Kiyohisa Mizoguchi:
Design and analysis of a flexible manufacturing system with simulation - effects of flexibility on FMS performance.
294-301
Electronic Edition (ACM DL) BibTeX
- John P. Shewchuk, Tien-Chien Chang:
An approach to object-oriented discrete-event simulation of manufacturing systems.
302-311
Electronic Edition (ACM DL) BibTeX
- Jocelyn R. Drolet, Colin L. Moodie, Benoît Montreuil:
Object oriented simulation with SMALLTALK-80: a case study.
312-322
Electronic Edition (ACM DL) BibTeX
- Chell A. Roberts, Terrence G. Beaumariage, Yasser Dessouky, Michael K. Ogle:
Object oriented simulation tools necessary for a flexible batch process management architecture.
323-330
Electronic Edition (ACM DL) BibTeX
- Thomas J. Schriber:
The modeling of perfect sequencing flexibilty in a scheduling environment.
331-340
Electronic Edition (ACM DL) BibTeX
- F. Paul Wyman:
Common features of simulation based scheduling.
341-347
Electronic Edition (ACM DL) BibTeX
- A. Alan B. Pritsker, David P. Yancey:
Total capacity management using simulation.
348-355
Electronic Edition (ACM DL) BibTeX
- Vadivelu Jeyabalan, Norman C. Otto:
Simulation models of materials delivery systems.
356-364
Electronic Edition (ACM DL) BibTeX
- Soemon Takakuwa:
Design and analysis of computer-aided cart systems for picking discrete items.
365-374
Electronic Edition (ACM DL) BibTeX
- Paul A. Savory, Gerald T. Mackulak, Jeffery K. Cochran:
Material handling in a flexible manufacturing system processing part families.
375-381
Electronic Edition (ACM DL) BibTeX
- Voratas Kachitvichyanukul, Wayne J. Davis, Claude Dennis Pegden, Kenneth J. Musselman, Ricki G. Ingalls, Walter J. Trybula:
Simulation and scheduling (panel).
382-391
Electronic Edition (ACM DL) BibTeX
- Gustavo A. Diaz, Betsi M. Harris:
Simulation of a centralized mail distribution center.
392-395
Electronic Edition (ACM DL) BibTeX
- Roger D. Phillips:
Material handling requirements for a distribution center.
396-401
Electronic Edition (ACM DL) BibTeX
- Zhao Xu, Reza M. Pirasteh:
Airline-catering plant material handling system analysis with simulation and scaled animation.
402-410
Electronic Edition (ACM DL) BibTeX
- Jerry G. Fox, Stephen K. Halladin:
Effective application of simulation in the life cycle of a manufacturing cell project.
411-418
Electronic Edition (ACM DL) BibTeX
- Nur E. Özdemirel:
Measuring the user acceptance of generic manufacturing simulation models by review of modeling assumptions.
419-427
Electronic Edition (ACM DL) BibTeX
- Charles R. Standridge, Martha A. Centeno:
Concepts for production modeling systems based on multiple user types.
428-434
Electronic Edition (ACM DL) BibTeX
- Tarun Gupta, Subramaniam Arasakesari:
Capacity planning in wood products industry using simulation.
435-440
Electronic Edition (ACM DL) BibTeX
- Jian Wang, Bernard J. Schroer, M. Carl Ziemke:
Understanding modular manufacturing in the apparel industry using simulation.
441-447
Electronic Edition (ACM DL) BibTeX
- Susan S. Baum, Cheryl M. O'Donnell:
An approach to modeling labor and machine down time in semiconductor fabrication.
448-454
Electronic Edition (ACM DL) BibTeX
- Mark Brazier, Carl J. Perry:
An approach to the construction and usage of simulation modeling in the shipbuilding industry.
455-464
Electronic Edition (ACM DL) BibTeX
- K. Heinz Weigl:
A survey of varied production systems and different aspects using computersimulation.
465-473
Electronic Edition (ACM DL) BibTeX
- Laura Giussani:
Simulation studies in a hot mill facility.
474-481
Electronic Edition (ACM DL) BibTeX
- C. Gregory John, Rodney E. Schultz:
Simulation modeling for military logistics and supportability studies.
485-490
Electronic Edition (ACM DL) BibTeX
- Stephen R. Parker:
Combat Vehicle Reliability Assessment Simulation Model (CVRASM).
491-498
Electronic Edition (ACM DL) BibTeX
- Christopher A. Feuchter, Charles A. Van Meter, Kurt M. Neuman, Kalla J. Sparrow:
When is a satellite not a toaster?
499-508
Electronic Edition (ACM DL) BibTeX
- David O. Rich, Randy E. Michelsen:
An assessment of the ModSim/TWOS parallel simulation environment.
509-518
Electronic Edition (ACM DL) BibTeX
- Thomas F. Schuppe:
Modeling and simulation: a Department of Defense critical technology.
519-525
Electronic Edition (ACM DL) BibTeX
- Larry D. Cork, David R. Holmen:
Airborne Battlefield Command and Control Center (ABCCC) III capacity study.
526-534
Electronic Edition (ACM DL) BibTeX
- Joseph R. Litko, William Brand Carter:
A Desert Storm crew flying hour model.
535-541
Electronic Edition (ACM DL) BibTeX
- Steven J. Wourms, Kenneth W. Bauer Jr.:
Impact of C-130 reliability and maintainability on future theater airlift system productivity.
542-548
Electronic Edition (ACM DL) BibTeX
- Letitia M. Pohl:
Evaluation of F-15E availability during operational test.
549-554
Electronic Edition (ACM DL) BibTeX
- Lisa Sokol, Jon B. Weissman, Paula A. Mutchler:
MTW: an empirical performance study.
557-563
Electronic Edition (ACM DL) BibTeX
- Gregory S. Thomas, John Zahorjan:
Parallel simulation of performance Petri nets: extending the domain of parallel simulation.
564-573
Electronic Edition (ACM DL) BibTeX
- David M. Nicol, Subhas C. Roy:
Parallel simulation of timed Petri-nets.
574-583
Electronic Edition (ACM DL) BibTeX
- John Craig Comfort:
Environment partitioned distributed simulation of queueing systems.
584-592
Electronic Edition (ACM DL) BibTeX
- James F. Ohi, Bruno R. Preiss:
Parallel instance discrete-event simulation using a vector uniprocessor.
593-601
Electronic Edition (ACM DL) BibTeX
- Phillip M. Dickens, Paul F. Reynolds Jr.:
A performance model for parallel simulation.
618-626
Electronic Edition (ACM DL) BibTeX
- Mary L. Bailey, Michael A. Pagels:
Measuring the overhead in conservative parallel simulations of multicomputer programs.
627-636
Electronic Edition (ACM DL) BibTeX
- Bojan Groselj:
Fault-tolerant distributed simulation.
637-641
Electronic Edition (ACM DL) BibTeX
- Vasant Sanjeevan, Marc Abrams:
The cost of terminating synchronous parallel discrete-event simulations.
642-651
Electronic Edition (ACM DL) BibTeX
- Sushil K. Prasad, Narsingh Deo:
An efficient and scalable parallel algorithm for discrete-event simulation.
652-658
Electronic Edition (ACM DL) BibTeX
- Charles E. Knadler Jr.:
The robustness of separable queueing network models.
661-668
Electronic Edition (ACM DL) BibTeX
- Abbas Asadi-Arbabi, Sayed Atef Banawan:
On the performance of the immediate restart concurrency control policy.
669-676
Electronic Edition (ACM DL) BibTeX
- Gölgen Bengü, Juan Carlos Ortiz:
A systems simulation approach to integrate maintenance operations.
677-687
Electronic Edition (ACM DL) BibTeX
- Sophia Scoggins, Mark Scoggins, Jerrold Stach:
A teletraffic simulator for circuit switched and signaling intelligent network with SS7.
688-694
Electronic Edition (ACM DL) BibTeX
- Siddharth Behera, Gopal Meempat:
Performance evaluation of ATM architectures in multimedia traffic environments.
695-704
Electronic Edition (ACM DL) BibTeX
- Nicholas Ilyadis, Peter Drexel, Andrzej Rucinski:
The simulation of the non-linear dynamic behavior of distributed routing networks using DECSIM.
705-715
Electronic Edition (ACM DL) BibTeX
- Prabhudeva Kavi, Victor S. Frost, K. Sam Shanmugan:
Generic approach to LAN modeling.
716-724
Electronic Edition (ACM DL) BibTeX
- Sub Ramakrishnan, Pratap Thondapu:
Interconnected ring networks: a performance study.
725-730
Electronic Edition (ACM DL) BibTeX
- Subrata Banerjee, Biswanath Mukherjee:
An efficient channel-feedback-based adaptive protocol for scheduling variable-length messages on slotted, high-speed fiber optic-LANs/MANs.
731-738
Electronic Edition (ACM DL) BibTeX
- Randall J. Stevens, Glenn F. Roberts:
The National Simulation Laboratory: the unifying tool for air traffic control system development.
741-746
Electronic Edition (ACM DL) BibTeX
- W. Manning, Bela Collins:
Dynamic traffic flow planning for ATC and airspace user requirements.
747-755
Electronic Edition (ACM DL) BibTeX
- Amedeo R. Odoni:
Issues in modeling a national network of airports.
756-761
Electronic Edition (ACM DL) BibTeX
- Reinhart D. Kühne, Malte B. Rödiger:
Macroscopic simulation model for freeway traffic with jams and stop-start waves.
762-770
Electronic Edition (ACM DL) BibTeX
- Edward Lieberman:
Integrating GIS, simulation and animation.
771-775
Electronic Edition (ACM DL) BibTeX
- John Danko, Victor Gulewicz:
Operational planning for electronic toll collection: a unique approach to computer modeling/analysis.
776-785
Electronic Edition (ACM DL) BibTeX
- Thomas M. Swip Jr., Heungsoon Felix Lee:
Application of an integrated modeling tool: United Parcel Service.
786-791
Electronic Edition (ACM DL) BibTeX
- Kyriakos Tsiflakos, Stephen C. Mathewson:
A rapid railway simulation model development system incorporating automatic model generation.
792-801
Electronic Edition (ACM DL) BibTeX
- D. Brent Bandy:
Simulation of Fox River locks boat lift.
802-808
Electronic Edition (ACM DL) BibTeX
- A. K. Kharwat:
Computer simulation: an important tool in the fast-food industry.
811-815
Electronic Edition (ACM DL) BibTeX
- Robert Kittell, Ann Dunkin:
Applying the simulation process: simulation study of HDA parts degreaser.
816-821
Electronic Edition (ACM DL) BibTeX
- Edward A. MacNair, Peter D. Welch:
Toward a higher level, output analysis interface.
822-831
Electronic Edition (ACM DL) BibTeX
- Mark I. Farber:
A methodology for simulation the U.S. recreational fishery for billfish.
832-840
Electronic Edition (ACM DL) BibTeX
- Conrado M. Gempesaw II, Catherine K. Halbrendt:
The financial impact of biotechnology on hog production: a dynamic-stochastic capital budgeting simulation approach.
841-845
Electronic Edition (ACM DL) BibTeX
- Wafik H. Iskander, D. Mark Carter:
A simulation model for same day care facility at a university hospital.
846-853
Electronic Edition (ACM DL) BibTeX
- Dharmaraj Veeramani, Moshe M. Barash, James R. Wilson:
A method for generating random cutting-tool requirement matrices for manufacturing systems simulation.
854-860
Electronic Edition (ACM DL) BibTeX
- Kwang Shin, Steve Corder:
A method for randomly generating capacitated networks.
861-865
Electronic Edition (ACM DL) BibTeX
- Charles H. Reilly:
Optimization test problems with uniformly distributed coefficients.
866-874
Electronic Edition (ACM DL) BibTeX
- Catherine Hurley:
Object-oriented graphical analysis.
877-881
Electronic Edition (ACM DL) BibTeX
- Donald L. Byrkett:
Classroom goodness of fit testing using Microsoft Windows.
882-886
Electronic Edition (ACM DL) BibTeX
- Robert G. Sargent:
Current issues in metamodeling (panel).
887
Electronic Edition (ACM DL) BibTeX
- Robert G. Sargent:
Research issues in metamodeling.
888-893
Electronic Edition (ACM DL) BibTeX
- Gerald W. Evans, Bruce E. Stuckman, Mansooreh Mollaghasemi:
Multicriteria optimization of simulation models.
894-900
Electronic Edition (ACM DL) BibTeX
- Kevin J. Healy, Lee W. Schruben:
Retrospective simulation response optimization.
901-906
Electronic Edition (ACM DL) BibTeX
- Mousumi Mitra Hazra, Stephen K. Park:
Solution to the indexing problem of frequency domain simulation experiments.
907-915
Electronic Edition (ACM DL) BibTeX
- David Goldsman, Keebom Kang, Andrew F. Seila:
Cramér-von Mises variance estimators for simulations.
916-920
Electronic Edition (ACM DL) BibTeX
- Peter A. W. Lewis, Richard L. Ressler:
Average regression-adjusted controlled regenerative estimates.
921-926
Electronic Edition (ACM DL) BibTeX
- Bruce W. Schmeiser, Mark D. Scott:
SERVO: simulation experiments with random-vector output.
927-936
Electronic Edition (ACM DL) BibTeX
- Bruce E. Stuckman, Gerald W. Evans, Mansooreh Mollaghasemi:
Comparison of global search methods for design optimization using simulation.
937-944
Electronic Edition (ACM DL) BibTeX
- Russell R. Barton, John S. Ivey Jr.:
Modifications of the Nelder-Mead simplex method for stochastic simulation response optimization.
945-953
Electronic Edition (ACM DL) BibTeX
- Sigrún Andradóttir:
A projected stochastic approximation algorithm.
954-957
Electronic Edition (ACM DL) BibTeX
- Mary A. Johnson, Sanghoon Lee, James R. Wilson:
Experimental evaluation of a procedure for estimating nonhomogeneous Poisson processes having cyclic behavior.
958-967
Electronic Edition (ACM DL) BibTeX
- Rajan Suri, Bor-Ruey Fu:
On using continuous flow lines for performance estimation of discrete production lines.
968-977
Electronic Edition (ACM DL) BibTeX
- Aarti Shanker, W. David Kelton:
Empirical input distributions: an alternative to standard input distribution in simulation modeling.
978-985
Electronic Edition (ACM DL) BibTeX
- Peter W. Glynn, Pierre L'Ecuyer, Michel Adès:
Gradient estimation for ratios.
986-994
Electronic Edition (ACM DL) BibTeX
- Sridhar Bashyam, Michael C. Fu:
Application of perturbation analysis to (s, S) inventory systems.
994-1003
Electronic Edition (ACM DL) BibTeX
- Felisa J. Vázquez-Abad, Pierre L'Ecuyer:
Comparing alternative methods for derivative estimation when IPA does not apply directly.
1004-1011
Electronic Edition (ACM DL) BibTeX
- George S. Fishman:
A Monte Carlo sampling plan based on product form estimation.
1012-1017
Electronic Edition (ACM DL) BibTeX
- Douglas J. Morrice:
The effects of batching on the power of the test for frequency domain methodology.
1018-1022
Electronic Edition (ACM DL) BibTeX
- Murat Köksalan, Nail Basöz:
A replication approach to interval estimation in simulation.
1023-1029
Electronic Edition (ACM DL) BibTeX
- Shu Tezuka:
Neave effect also occurs with Tausworthe sequences.
1030-1034
Electronic Edition (ACM DL) BibTeX
- Lih-Yuan Deng, E. Olusegun George, Yu-Chao Chu:
On improving pseudo-random number generators.
1035-1042
Electronic Edition (ACM DL) BibTeX
- Lih-Yuan Deng, Yu-Chao Chu:
Combining random number generators.
1043-1046
Electronic Edition (ACM DL) BibTeX
- Moon Ryul Jung, Jugal K. Kalita, Norman I. Badler, Wallace Ching:
Simulating human tasks using simple natural language instructions.
1049-1057
Electronic Edition (ACM DL) BibTeX
- Michael Elhadad, Steven Feiner, Kathleen McKeown, Dorée D. Seligmann:
Generating customized text and graphics in the COMET explanation testbed.
1058-1065
Electronic Edition (ACM DL) BibTeX
- Philip R. Cohen:
Integrated interfaces for decision-support with simulation.
1066-1072
Electronic Edition (ACM DL) BibTeX
- Sanjai Narain:
An axiomatic basis for general discrete-event modeling.
1073-1082
Electronic Edition (ACM DL) BibTeX
- Ashvin Radiya:
Towards a logical foundation of discrete event modeling and simulation.
1083-1085
Electronic Edition (ACM DL) BibTeX
- François E. Cellier:
Qualitative modeling and simulation: promise or illusion.
1086-1090
Electronic Edition (ACM DL) BibTeX
- Felix Bretschneider, Christa Kopf, Markus Zolg:
Process control for large complex systems.
1091-1100
Electronic Edition (ACM DL) BibTeX
- Kirstie L. Bellman:
An approach to integrating and creating flexible software environments supporting the design of complex systems.
1101-1105
Electronic Edition (ACM DL) BibTeX
- Marco Chierotti, Jerzy W. Rozenblit, Witold Jacak:
A framework for simulation design of flexible manufacturing systems.
1106-1114
Electronic Edition (ACM DL) BibTeX
- Suleyman Sevinc:
Theories of discrete event model abstraction.
1115-1119
Electronic Edition (ACM DL) BibTeX
- Paul A. Fishwick:
Heterogeneous decomposition and inter-level coupling for combined modeling.
1120-1128
Electronic Edition (ACM DL) BibTeX
- Cheng-Jye Luh, Bernard P. Zeigler:
Abstraction morphisms for world modelling in high autonomy systems.
1129-1138
Electronic Edition (ACM DL) BibTeX
- Robert F. Gordon, Paul G. Loewner, Edward A. MacNair, Haojin Wang, Kurtiss J. Gordon, James F. Kurose:
Error detection and display for graphical modeling environments.
1139-1145
Electronic Edition (ACM DL) BibTeX
- Michael Rooks:
A unified framework for visual interactive simulation.
1146-1155
Electronic Edition (ACM DL) BibTeX
- Paul A. Fishwick, Hanns-Oskar A. Porr:
Using discrete event modeling for effective computer animation control.
1156-1164
Electronic Edition (ACM DL) BibTeX
- Joel J. Luna:
Application of hierarchical modeling concepts to a multi-analysis environment.
1165-1172
Electronic Edition (ACM DL) BibTeX
- Michael K. Ogle, Terrence G. Beaumariage, Chell A. Roberts:
The separation and explicit declaration of model control structures in support of object-oriented simulation.
1173-1179
Electronic Edition (ACM DL) BibTeX
- Christopher Landauer:
Incorporating simulation into a design environment.
1180-1186
Electronic Edition (ACM DL) BibTeX
- Paula Sweeney, Alan Norton, Robert Bacon, David R. Haumann, Greg Turk:
Modelling physical objects for simulation.
1187-1193
Electronic Edition (ACM DL) BibTeX
- Michael Kass:
Height-field fluids for computer graphics.
1194-1198
Electronic Edition (ACM DL) BibTeX
- A. Alan B. Pritsker, James O. Henriksen, Paul A. Fishwick, Gordon M. Clark:
Principles of modeling (panel).
1199-1208
Electronic Edition (ACM DL) BibTeX
- Robert Bruce Taylor, Hamdy A. Taha:
Automatic generation of a class of simulation models from databases.
1209-1217
Electronic Edition (ACM DL) BibTeX
- Robert E. Frederking:
Interactive experiment planning to control knowledge-based simulation.
1218-1227
Electronic Edition (ACM DL) BibTeX
- Robert S. Roberts:
Simulation languages and database theory: some considerations from the entity-relationship model.
1228-1235
Electronic Edition (ACM DL) BibTeX
Copyright © Wed Jun 4 19:01:25 2008
by Michael Ley (ley@uni-trier.de)
